Contact Vanitec
Tel: +44 (0)1959 563400
Fax: +44 (0)1959 562563
E-mail: info@vanitec.org
Vanitec Limited,
Winterton House, High Street, Westerham, Kent TN16 1AQ, England
Application Technologies of Vanadium in Flat-rolled Steels – Proceedings of the Vanitec Symposium, Suzhou, China, Oct. 2005. (V1005)
The Use of Vanadium in Flat Rolled Products
P. S. Mitchell
Microalloying with Vanadium for Improved Cold Rolled TRIP Steels
C. Scott, F. Perrard, P. Barges
Development and Production of HSLA 80 ksi (550MPa) Steels at Gallatin Steel
L. K. Chiang
Vanadium in Cold-rolled Sheet Steels
John Speer
A Review of Vanadium Microalloying in Hot Rolled Steel Sheet Products
Robert J. Glodowski
Extended Use of Vanadium in a New Generation of Flat Rolled Steels
Stanislaw Zajac
Study on High Tensile Heavy Plate with V-N Microalloying Technology
Yang Xiong,Jin Yongchun,Wang Quanli,Zhang Gongyan
Hot Deformation Behavior and Recrystallization Controlled Rolling of Ti-V-N Plate Steels
Sun Quanshe, Zhang Yongjia
Cause and Measures of Transverse Corner Crack in Hull Structural V-containing Steel CC Slab
Ma Qingshen, Jiang Zhonghang, Xu Li, Luo Wenbin,Yang Xiaoshan, Liu Yan
Effect of Vanadium on the Microstructure and Properties of Fire-resistant Weathering Steels
Zheng Zhiwang, Liu Qingchun
Application of VN in 400MPa Cu-P-Cr-Ni Weather and Erosion Resistant Steels
Li Jun
Effect of Vanadium on the Microstructure and Properties of Fire-resistant Steels
Zheng Zhiwang, Liu Qingchun
Analysis on Vanadium's Impact on Metallographic Transitions of HSLA Steel
Liu Yong,Zhang Zhongping,She Guangfu,Zhou Liquan,Yu Wanhua,Han Jingtao
Research and Application of High-Strength Reinforcing Bar – Proceedings of the Vanitec Symposium, Hangzhou, China, Oct. 2003. (V1003)
Some Recent Results of the Research on Steel Rebars
A. Franchi and P. Crespi
Development and Production of Advanced Reinforcing Steel
D. Russwurm
European Standards for Reinforced Concrete
U. Litzner
Reinforcing Technique with BSt500 - The Networking of All Parties to Reduce Costs and Improve Quality
D. Jungwirth
Productions and Applications of 400MPa Hot Rolled Ribbed Bars
Y. Xu
Devoting Major Efforts to Application & Dissemination of 400 MPa III Grade Rebar
S. Xie
The Affects of the Bar Ductility on the Failure Morphology and Safety of the Structures
Y. Xu, Z. Cheng and X. Wang
Study on the Effect of Reinforcement on the Earthquake - Resistance of Xiaowan Arch Dam
H. Chen, Y. Guo and J. Tu
Popularization and Application of HRB400MPa(20MnSiV) Hot - Rolled Rebars in Hunan Province
C. Xu and Z. Wang
Experimental Research on Mechanical Properties of Corroded Steel Bars
Y. Xu, Z. Cheng, X. Wang, L. Liu, P. Guan and S. Yang
Application of Grade III Reinforced Steel in the Shearing Wall Frame Structure of Jinjiang Garden Project
J. Lin and Y. Tang
The Commercial Trial - Production of HRB400 Reinforced Bar with V - N Microalloying
S. Su, W. Wan, R. Zhang, M. Zhao and Y. Wang
Application of Electroslag Welding in HRB400 Reinforced Bar
C. Xu, Y. Chen and Y. Liu
Research and Development of High - Strength Ribbed Bars in Chehgde Steel
X. Huang and X. Meng
Development of 500 MPa High Strength Steel Bar
D. Gong, K. Zhang and J. Yan
Research, Production and Application of High Strength Rebars
C. Yang
Research and Production of High Strength Hot Rolled Ribbed Steel Bar BS G460
W. Wan, X. Yu and R. Zhang
Trial - Production of HRB400 Hot Rolled Ribbed Bar Ø6.0 mm,
J. Kong, B. Zhao, Z. Wang, Y. Zheng, S. Zhang and G. Zhao
Research and Development on HRB400 Reinforced Bars in Handan Steel
L. Sun, F. Wang, M. Li and L. Yang
Report on the Trial Production of HRB500 Reinforced Bars in Chengde Steel
Z. Bai
Research and Development of HRB400 Hot - Rolled Ribbed Bar
J. Yan, Y. Li and X. Liang
Research on the Test of Properties of Aseismatic Reinforced Bars Produced by Chengde Steel
Y. Zhang, S. Gong and G. Sheng
Market Development of HRB400 Grade III Rebar
Z. An
The Use of Vanadium in Steel - Proceedings of the Vanitec Symposium, Beijing, China, Oct. 2001. (V0502)
The Use of Vanadium
P. S. Mitchell
A New Role for Microalloyed Steels Adding Economic Value
M. Korchynsky
Development and Use of Vanadium in Micro-Alloyed Reinforcing Bar
V. Russwurm
Vanadium Microalloyed Forging Steels
G. Krauss
Precipitation and Grain Refinement in Vanadium-Containing Steels
S. Zajac
The Evolution of Microstructure During Thin Slab Direct Rolling Processing in Vanadium Microalloyed Steels
Y. Li, D. N. Crowther, P. S. Mitchell and T. N. Baker
The Effects of Microalloying Elements on Cracking During Continuous Casting
D. N. Crowther
The Influence of Vanadium-Microalloying on the Weldability of Steels
P. H. M. Hart
Vanadium Microalloying in Steel Sheet, Strip and Plate Products
Robert J. Glodowski
The Use of Vanadium in Steel - Proceedings of the Vanitec Symposium, Guilin, China, Nov., 2000. (V0101)
The Production and Use of Vanadium Worldwide
P. S. Mitchell
Development of China Vanadium Industry
Zhou Jiacong
Overview of Microalloying in Steel
W. B. Morriso
Proposals for the Optimization of Steel Bars in Construction
Xu Youlin
Use of Vanadium in Flat Products (Plate and Strip)
M. Korchynsky
Development and Application of V, Ti and Nb Microalloyed Steel in Anshan Iron & Steel Group Co.
Lin Ziquan, Ao Liege, Hao Sen
Vanadium in Medium and High Carbon Steels
R. J. Glodowski
Research on New HSLA Steel- WDL Steel with Low Susceptibility to Weld Crack
Chen Xiao
The Manufacture and Properties of As-Rolled V -Containing Structural Steels
R. Lagneborg
Research and Production of V -Cu-Ni Series High Strength Steel for Pressure Vessel
Zhang Yongjia
The Weldability of Vanadium Microalloyed Steels
P. H. M. Hart
New Grade III Rebar Steelmaking by Converter with Direct Alloying of Vanadium Pellet-Study of 20MnSiV Production Experiment
Liang Xinwei, Liu Wei
A Comparison of the Effects of Microalloying on Cracking During Continuous Cracking
D. N. Crowther
Effect of VN Alloying on the Structure of 20MnSiV Concrete Steel
Tang Daiming, Zhang Chunlan, Xu Benping, Gong Deping, Tang ling
Research and Application on Medium-Carbon Microalloyed High Strength Steel
Shougang Corporation
Study on Application of VN Microalloyed Steel
Xia Maosen, Sun Weihua, Qin Xiahai
Summary on 20MnSiV Production Test
Zhang Xinjian
Application of PC in the Processing of V2O5 Production Data
Zhang Qunzhan, Liu Weizhong
Application of VN Alloy in 400MPa Reinforcing Bar
Gong Deping, He Mingxing, Luo Kaijin
Vanadium in Rail Steels - Proceedings of Vanitec Seminar in Chicago, 8th Nov. 1979. (V120)
A chromium-vanadium alloyed railsteel for heavy duty requirements
H. Schmedders
The manufacture and railroad trials with chromium-vanadium steel for heavy duty service, e
A. M. Sage, W. Hodgson, D. H. Ston
Development of improved railand wheel materials
S. Marich
Fast-welding chromium-molybdenum-vanadium extra-high strength railsteels
F. B. Fletcher, Y. E. Smith and V. A. Biss
Development of a low carbon vanadium-copper-chromium rail steel of improved weldability for curves and points in European railways
J. Dilewijns, L. Schetky, A. M. Sage
Thermit welding of chromium-vanadium railsteel
H. D. Fricke
Vanadium Structural Steels - Reprint of papers on vanadium steel from the proceedings of “ASM HSLA Steels Technology and Applications Conference, Philadelphia, USA, Oct., 1984. (V0485)
Recent Innovations in Alloy Design and Processing of Microalloyed Steels
W. Roberts
Prediction of Microstructure Development During Recrystallization Hot Rolling of Ti-V Steels
W. Roberts, A. Sandberg, T. Siwecki.
Achieving Grain Refinement Through Recrystallization Controlled Rolling and Controlled Cooling in V-Ti-N Microalloyed Steels
Y-Z. Zheng, A. J. DeArdo. R. M. Fix. G. Fitzsimons
Processing Characteristics and Properties of Ti-V-N Steels
T. Siwecki. A. Sandberg, W. Roberts.
The Effects of Accelerated Processing on the Microstructure and Mechanical Properties of V- and V+ Cb HSLA Steels
D. M. Fegredo, J. D. Boyd.
Microstructures and Properties of Controlled Rolled and Accelerated Cooled Molybdenum-Containing Line Pipe Steels
A. P. Coldren, T. G. Oakwood.
HSLA Steel with High Weldability and Improved Characterizations Obtained Through Vacuum Heated Ladle Refining Technique
R. Blondeau, G. Pressouvre, J. Maniere, L. Cadiou.
Formable Hot-Rolled Steel with Increased Strength
T. Nilsson. Svenskt Stal Aktiebolag. Domnarvet. Borlange.
Restricted Yield Strength Variation in High Strength Low Alloy Steels,
E. G. Hamburg
Continuously Annealed Cold-Rolled Microalloyed Steels with Different Microstructures
R. Pradhan
Effect of Cold Forming on the Strain-Controlled F`atigue Properties of HSLA Steel Sheets
J. M. Holt
A Study of Deformation Characteristics of Mn-V Dual Phase Steel
M. Mingtu, W. Degen, W. Baorong
A new HSLA Steel for an Automotive Steering Coupling Component
D. D. Rogers, D. A. Wilkinson
Properties of Low-Carbon As-Rolled Steel Bars for Machine and Structural Use
H. Ohtani, F. Nakasato
Microalloyed Bar for Machine Structural Use
T. Sampei, T. Abe, H. Osuzu, I. Kozasu
Development of Microalloyed Medium Carbon Hot Rolled Bar Products
J. F. Held, B. A. Lauer
Mechanical Properties and Machinability of a High Strength Medium Carbon, Microalloyed Steel
V. Ollilainen, H. Hurmola, H. Pontinen
Concrete and Tube Steels Microalloyed by Vanadium and Nitrogen
R. Halbrstatova, T. Prnka, v. Smid, V. Navrat
Precipitation Strengthened Spring Steel for Automotive Suspensions
T. Yamamoto, R. Kobahashi
Microalloyed Pearlitic Steels for the Wire Industry --Mechanisms of Alloy Element Redistribution and Strengthening Processes in Chromium-Vanadium Eutectoid Steels
T. D. Mottishaw, G. D. W. Smith
Microalloying and Precipitation in Cr-V Rail Steels
D. E. Parsons, T. F. Malis, J. D. Boyd
The Structure and Toughness of the Weld Heat-Affected Zone of a C-Mn-V Steel
J. T. Bowker, A. G. Glover,:R. B. Lazor.
Mechanical Properties and Physical Metallurgy of HSLA Steel Laser Beam Weldments
P. E. Denney, E. A. Metzbower
